7 DIY Workbench Plans | DIY Experience

7 DIY Workbench Plans

The following DIY workbench plans provide easy solutions when looking to install a suitable working space. Having a workbench takes out a lot of hassle in your DIY projects. It is an effective way of taking advantage of the space available in your garage, shed or wherever you work from. You can also get storage space for your tools and finished projects.

The costs, time and difficulty of each workbench plan differs on many variables such as skill level and kinds of materials. Below are free DIY workbench plans that you can easily try at home with readily available materials.
a tidy workbench

1. DIY Workbench Plan from Instructables

This workbench plan repurposes a salvaged door as a bench top, so you don’t have to worry about cutting the right measurements yourself. You can use a door that has been drilled and mortised or not. This DIY workbench project takes a considerable amount of time. Some of the items required include:

  • 2×4 lumber for making the frame. These have to be straight pieces without splits, knots, or twists so as not to comprise the quality of the bench.
  • screw gun to make it easier to drive in the screws.
  • 2 ½ drywall screws for assembling the different joints.
  • ½” thick plywood – this will be suitable if the workbench is going to have shelves.
  • Tape measure so you can size the lumber appropriately.
  • drill to make the holes where the screws will go.

2. Cheap DIY Workbench by HammerZone

This workbench plan will take about two hours and just over $20. The project is a very simple one where you use 2×4 lumber pieces to make the legs and sides. With this DIY workbench plan, you get a top workspace and a shelf underneath, which can be for storage. What you need are:

  • Four 2x4s of 8″ and another one of 6″ for the frames.
  • Plywood or oriented strand board (OSB) of 7/16″- this make the bench top, so you can alter the dimensions of the plywood/OSB to fit the size of workbench you have in mind.
  • 3″ deck screws to fasten the plywood to the legs and sides.

modern DIY workbench

3. DIY Fold-Down Workbench from DIY Network

When dealing with space constraints, even the smallest workbench will appear to eat up too much room. This fold-down piece takes care of those worries by providing a usable work section that you can put away after work. The project requires an advanced level of skill and takes about half a day to complete, and that consists of the time required to make the preparations and for the paint to dry. Besides the 2x4s, you will need:

  • plywood, which makes the working area.
  • piano hinge – also called a continuous hinge is what facilitates the folding of the bench top.
  • Wood cleats are essential in attaching heavy cabinets and fixtures.

4. DIY Heavy Duty Workbench, One Project Closer

The following tutorial is for a workbench that can withstand all the harsh functions it has to play. This DIY project gives you a heavy-duty working space and shelves for storage. You can decide the number of shelves to include in the plan. Such a workbench is suitable for your garage or basement. It can take the better part of the day to complete this project, especially if you have to cut the wood yourself. The project requires:

  • Nine 2x4s to create a sturdy frame.
  • Cabinet-grade plywood for the shelving. Keeping the dimensions of the shelves similar means you don’t have to get different sheets of plywood or make too many cuts.
  • 200 count #8 1 ¼ screws for screwing in the tabletop.
  • Construction adhesive, which holds the lumber and plywood together for a lasting workbench.

5. DIY Garage Workbench, Family Handyman

This DIY workbench provides a workspace at the top that folds down and drawers that are easy to assemble. When the top folds down, it still leaves a good portion of space that you can use for small projects. The folded part is an extra that is handy when dealing with large projects in your garage.

You also get a shelf, just under the top bench to store items like cans and toolboxes that are too bulky to go into drawers. Constructing the workbench is simple and takes about a day. You end up with a compact working bench and storage space for all your nails, screws, hammers and other DIY essentials. This workbench takes space into great consideration. The basics are:

  • Plywood sheet for making the top.
  • 2x4s lumber to hold the top in place.
  • Hinges – since the bench has a fold down piece, it will need a folding angle.
  • Varnish – you can pick from the variety of choices available. The point is to have a nice finish for a beautiful and durable workbench.

DIY antique workbench with tools

6. Simple DIY Workbench, Fine Woodworking

This project is for a DIY workbench that seeks to simplify woodworking. A majority of DIYers work in appropriate spaces because it is too expensive or too difficult to have a bench in their shed or garage. With this project, you will need the following common lumberyard supplies:

7. Easy DIY Shop Workbench, Shanty 2 Chic

This DIY bench can be a new recreation or a modification of an existing one. The point is to create more space around a shop or garage or whatever your woodworking area may be. You get a very detailed guide with the plan, so there is no chance of getting lost along the way. The legs are drilled MDF boards that you have to connect to each other.

  • 2 ½ screws are required for attaching the bottom frame to the legs.
  • Locking casters go to the base of the bench to give you a piece that can move around easily when the need arises. It also means you can work outside when it is to stay indoors.

Another advantage of such a workbench is that you can leave painted pieces outside to dry without removing them from the bench top.

Even when you have all the right tools, if your woodworking space is wrong, then expect poor results. It is a struggle trying to get anything done on your garage floor or rickety table. Do-it-yourself workbench plans can help you get the ultimate working area without spending a lot or using up all the garage or shop space.

Image sources: 1, 2, 3.

Leave a Reply

Your email address will not be published. Required fields are marked *